Cangzhou Aoguang mechanical Equipment Co., LTD not only produces elbow machine, but also produces pipe bending machine, tee machine, pipe expanding machine, press machine, bevel machine and other mechanical equipment as well as supporting molds.
Carbon steel pusher unit: elbow pusher main machine, hydraulic pump station, operation station, motor control cabinet, intermediate frequency power supply, compensation capacitor, water cable, intermediate frequency coil adjustment frame, reactor.
Advantages of pushing machine:
1. Heating power part of pushing machine -- constant power output.Using the unique voltage regulation technology, even if the incoming voltage fluctuation of 10%, still can maintain the stability of the intermediate frequency output power.Energy saving, environmental protection, low noise, low pollution.
2. Push machine adopts hydraulic automatic feeding mechanism.
3. The gate of pushing machine adopts hydraulic pressure to open and close.
4. The coil bracket of the pushing machine is adjusted by the motor up and down, back and forth, for safer operation.
5. According to the needs of the equipment, two or four oil cylinders are used to push the machine, making the operation of the equipment more stable.
Select the main push pump according to the pushed elbow and select the feeding speed. The mandrel is heated to the working temperature and begins to push. During the working, the pushing speed can be adjusted.Note: when the main pump work can be used at the same time, generally only one can be used.It can also be used to step back without stopping.The back pump cannot be used at the same time, only one can be started and the other can be used as a backup.Feeding pump can only be used when feeding.The safety pressure of the hydraulic system of the main oil pump shall be set as, and the safety pressure of the hydraulic system of the auxiliary oil cylinder shall be set as.Both ends of the push machine travel switch, the actual travel should be less than the maximum travel, that is, the front and rear ends of the active push plate
Cangzhou Aoguang mechanical Equipment Co., LTD not only produces elbow machine, but also produces pipe bending machine, tee machine, pipe expanding machine, press machine, bevel machine and other mechanical equipment as well as supporting molds.
Pushing elbow forming machine mainly include alloy core head, intermediate frequency coil bracket, intermediate frequency coil, export support, pushed the door open, hydraulic cylinder, after pushing plate, gate, hydraulic lift cylinder, the main oil cylinder, cylinder bracket, after feeding the core rod, the big chassis, oil cylinder, motor, axial plunger pump, integrated block (which installation of the hydraulic control valve), etc.
Push the bending machine, bending machine head and bed parts reinforcement design, and after annealing treatment to eliminate internal stress, the whole has enough strength and rigidity, prevent permanent deformation.Directly from the nose upper insert when transmission shaft assembly, installation precision, convenient maintenance, bend the spindle and sprocket and integral forging, the whole processing, overall hob, keyless connection, force uniform, driven by double oil cylinder, pipe bending process, the turning arm before bending close to set the Angle of the hydraulic system of automatic throttle buffer, greatly improved the precision of bending, fast restoration, close to the starting point in the process of return with throttling buffer, greatly improve the restoration precision and work efficiency.Full hydraulic drive, microcomputer controller can be preset 16 kinds of angles, can be used to push the foot switch of elbow forming machine to complete the whole process at one time, hydraulic clamping, hydraulic pressing, hydraulic bending pipe, hydraulic core pulling, five oil cylinders (can increase the trolley feeding and space corner function).
|
