Elbow machine mainly includes:Strip base (1), cylinder (2), cylinder bracket (3), rear baffle (4), push plate (5), front baffle (6), etc., in the front baffle (6) and the rear baffle (4) between the center of the hole connected with a guide pipe (7), in the front baffle (6) inside, is provided with a roller box (8),The outer side of the front baffle plate (6) is vertically fixedly connected with a rocker arm base (9), the rocker arm base (9) is provided with a movable axis (10), the movable axis (10) is connected with a rocker arm (11) with an adjustable length, and the front end of the rocker arm (11) is connected with a chuck (12) relative to the center hole.

The elbow machine is a pipe fitting processing equipment which can not only bend the pipe fittings but also push the elbow. It is easy to operate and reduces the cost.

The repair and maintenance of the elbow machine equipment: check the fasteners of all parts of the elbow machine, so that the elbow machine is in a fastening state.The hydraulic pump station parts of the elbow machine are all equipped with rubber sealing rings. If the sealing rings are damaged or leaked, they should be replaced in real time.If it is found that the progress and retreat of the elbow machine are out of order, first check whether the solenoid valve is acting normally as the solenoid valve is acting normally.If there is a card to the phenomenon, open with gasoline or diesel oil cleaning, reinstall can be.Elbow machine in 1-2 months after use, clean the oil tank and filter a hydraulic oil.When cleaning the tank, clean the oil inlet filter of each pump.The above is a brief introduction to the repair and maintenance of the elbow machine.

Elbow machine equipment is the most basic pipe fitting equipment of our company. Elbow machine uses medium frequency induction high temperature to push the elbow. This heating method has strong continuity and fast production efficiency, which is suitable for large-scale elbow production.

Supply elbow machine manufacturers

The elbow machine produced by our company is mainly one of the necessary pipe fittings equipment for the production of elbow fittings, such as elbow machine, beveling machine, typewriter, sandblasting machine, etc., which will be used in the production of elbow fittings.All the customers who order the company's pipe fittings equipment, the company allows customers to order excellent equipment at a low price.

Divided by the material carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon cryo, PVC, PPR, RFPP(increase polypropylene) and so on.

It can be divided into pushing, pressing, forging, casting and so on.

According to the manufacturing standard, it can be divided into national standard, electric standard, ship standard, chemical standard, water standard, American standard, German standard, Japanese standard, Russian standard, etc.

According to its radius of curvature to divide: can be divided into long radius elbow and short radius elbow.A long radius elbow is a pipe whose radius of curvature is equal to 1.5 times the outside diameter, i.e. R=1.5D.A short radius elbow is one whose radius of curvature is equal to the outside diameter of the pipe, i.e. R=1.0D.(D is the elbow diameter and R is the radius of curvature).

According to the pressure grade, there are about 17 kinds, which are the same as the American pipe standard, including SCH5S, SCH10S, SCH10, SCH20, SCH30, SCH40S, STD, SCH40, SCH60, SCH80S, XS.SCH80, SCH100, SCH120, SCH140, SCH160, XXS;The commonly used ones are STD and XS.

According to different shapes and uses can be divided into: groove type elbow, sleeve type elbow, double bearing elbow, flange elbow, reducing elbow, seat elbow, internal and external tooth elbow, stamping elbow, push elbow, socket elbow, butt-welding elbow, inner wire elbow, etc.

Our company mainly produces elbow machine, pipe bender, tee machine, pipe expanding machine, press, beveling machine and other pipe fittings equipment.458-454.