This equipment for four cylinder push and two cylinder push two types, push produced tu820 ×40 above elbow, the original use four cylinder push.Four cylinders 1067×65 maximum push-make elbow 22.

Four cylinder design push plate force all.Relative to the two-cylinder elbow with large thrust design longitude is reasonable, and reduce the manufacturing cost, for the user to save a part of the purchase cost.

The four-cylinder elbow machine is designed for automatic feeding, automatic regulating of stamen rod, automatic inserting door and automatic gate. It is very convenient to operate and the working efficiency is greatly improved.

Supporting medium frequency power supply heating bad material.

The medium frequency heating elbow machine is designed for large diameter steel pipe production can not meet the market specifications are not complete.

The equipment can make seamless steel tube, coil pipe, straight seam welding pipe, get thermal expansion, the product is divided into a variety of specifications, medium frequency heating elbow machine itself is a non-standard product, so there is no specific specifications and models, elbow diameter from 21mm to 1620mm, wall thickness from 3mm to 120mm we can do.

We can make all kinds of diameter elbow, according to the user's requirements to make all kinds of models of elbow, we can directly make all kinds of models of medium frequency heating elbow machine according to the customer's requirements.

Medium frequency heating elbow machine structure and working principle, the equipment is double oil average speed forward push system, pump station valve station adopts integrated form, pump station is composed of multi-pole;Intermediate frequency heating elbow machine for the work of 1 pump, set up a fast forward fast back pump.

Intermediate frequency heating elbow machine is divided into a push (push elbow) and two (three) push type (push pipe expansion) two forms.Hydraulic secondary propulsion pipe making machine, standard type total length stroke 10.5-12.5m, we can also lengthen the total stroke according to customer requirements.

If the heating power is installed at the front end of the equipment, if the induction coil is placed on the adjustment rack, set the mold and pipe together, open the water pump and if power supply, and adjust the IF power, then the mold and pipe of the core head of the expanding tube can be returned.The pipe can be expanded when the pipe making machine is started.If power thyristor, if coil, reactor and other components need circulating water cooling.The electrical part of the pipe-making machine is installed in the electrical control cabinet. The travel switch is installed at both ends of the equipment. When the push plate is in place, it will stop automatically.Note: The actual stroke of the rod should be less than the maximum stroke of the rod, that is, there should be a margin of 30-50mm between the front and rear ends of the rod and the actual head of the rod, so as to avoid the impact of the cylinder piston on the cylinder flange when it runs to both ends of the cylinder, causing damage to the equipment.Before the equipment leaves factory, we have all been debugged, and our manufacturer will send someone to guide the installation and debugging.

Cangzhou Aoguang mechanical Equipment Co., LTD not only produces elbow machine, but also produces pipe bending machine, tee machine, pipe expanding machine, press machine, bevel machine and other mechanical equipment as well as supporting molds

706707