Type hydraulic elbow push system is pushed into the elbow, elbow now push type is made when one of the most main bend forming production process, first, because the push type made of elbow bend is pushing system production speed, and then push the system elbow when production can be made into mass production, is in the elbow push system, the quality of elbow push system the molding process is now bend the main forming production process.

The equipment can make seamless steel tube, coil pipe, straight seam welding pipe, get thermal expansion, the product is divided into a variety of specifications, medium frequency heating elbow machine itself is a non-standard product, so there is no specific specifications and models, elbow diameter from 21mm to 1620mm, wall thickness from 3mm to 120mm we can do.

We can make all kinds of diameter elbow, according to the user's requirements to make all kinds of models of elbow, we can directly make all kinds of models of medium frequency heating elbow machine according to the customer's requirements.

Pushing elbow push system is made of elbow, elbow now push type is made when one of the most main bend forming production process, first, because the push type made of elbow is pushing elbow production speed, and then push the system elbow can into mass production, when production is in elbow push system, the quality of elbow push system the molding process is now bend the main forming production process.

Select the main push pump according to the selected speed of the elbow to be pushed, the sluice mandrel to be heated to the working temperature to start pushing. During the work, the pushing speed can be adjusted and pushed to the middle point. The pushing machine automatically stops the feeding of the hydraulic gate.Note: The main pump can be used at the same time when working, in general, only one can be used.It can also be used to step back without stopping.The back pump cannot be used at the same time, only one can be started, and the other can be used as a backup.Feeding pump can only be used when feeding., the safety pressure of the hydraulic system of the main oil pump shall be set as, and the safety pressure of the hydraulic system of the auxiliary oil cylinder shall be set as.The actual stroke should be less than the maximum stroke, that is, there is some margin between the front and rear ends of the active push plate and the actual end ends, so as to avoid the cylinder piston running to.

Cangzhou Aoguang mechanical Equipment Co., LTD not only produces elbow machine, but also produces pipe bending machine, tee machine, pipe expanding machine, press machine, bevel machine and other mechanical equipment as well as supporting molds.