Select the main push pump according to the elbow made by the customer, select the feeding speed, the sluice gate and the mandrel to be heated to the working temperature to start pushing, during the working, the pushing speed can be adjusted, push to the middle point and the pusher machine will stop automatically, the hydraulic sluice gate will be dead, the mandrel will be loaded, release the sluice and go back to the end point, and the sluice gate to the outer diameter of the rod will start pushing.Note: when the main pump work can be used at the same time, generally only one can be used.It can also be used to step back without stopping.The back pump cannot be used at the same time, only one can be started and the other can be used as a backup.Feeding pump can only be used when feeding.The safety pressure of the hydraulic system of the main oil pump shall be set as, and the safety pressure of the hydraulic system of the auxiliary oil cylinder shall be set as.There is a travel switch at both ends of the push machine stroke, the actual stroke should be less than the maximum stroke, that is, the active push plate before and after both ends from the actual end of the margin, so as not to run the cylinder piston to.

Bend machine is mainly used for carbon steel and alloy steel price of bend forming, if you need the product is stainless steel elbow, please select cold push bend machine equipment mainly include: frame, main oil cylinder plate (including the main oil cylinder), active pushing plate, the plate before, semi-automatic feeding mechanism, intermediate frequency adjust coil frame (including intermediate frequency heating coil), intermediate frequency power supply, electric control system, etc.

Elbow itself belongs to non-standard products, so there is no specific specifications and models, we can directly customize according to customer requirements.

The elbow machine is mainly used for the elbow forming of carbon steel and alloy steel. If the product you need is stainless steel elbow, please choose cold push elbow machine.

Push machine manufacturer is mainly used to produce various types of elbow, the equipment is divided into hydraulic push system, it can push the heated raw materials into the core rod mold to produce elbow products.The equipment is made of seamless steel pipe, welded steel pipe, alloy steel and carbon steel, and the pushing range is 21-1620mm. Two cylinder pushing machine or four cylinder pushing machine can be used according to the size of the product.Small diameter steel tubes are expanded to produce large diameter elbows through variable core. The raw materials must be ductile pipes.We can make all kinds of diameter elbow, according to the user's requirements to make all kinds of models of elbow, we can directly make all kinds of models of medium frequency heating elbow machine according to the customer's requirements.

Cangzhou Aoguang machinery Equipment Co., LTD not only produces push-making machine, but also produces, pipe bending machine, tee machine, elbow machine, pipe expanding machine, press machine, bevel machine, mold and other mechanical equipment and supporting molds.