Hydraulic bend machine is mainly used for carbon steel and alloy steel price of bend forming, if you need the product is stainless steel elbow, please select cold push bend machine equipment mainly include: frame, main oil cylinder plate (including the main oil cylinder), active pushing plate, the plate before, semi-automatic feeding mechanism, intermediate frequency adjust coil frame (including intermediate frequency heating coil), intermediate frequency power supply, electric control system, etc.

Intermediate frequency elbow itself belongs to non-standard products, so there is no specific specifications and models, we can directly customize according to customer requirements.

If you need stainless steel elbow, please choose cold push elbow machine.

Cangzhou Aocheng Machinery Equipment Co., LTD not only produces seamless elbow machine, but also produces pipe bending machine, tee machine, pipe expanding machine, press machine, bevel machine and other mechanical equipment as well as supporting molds.

seamless elbow machine is composed of five parts, including frame body, main oil cylinder, push-type oil cylinder, hydraulic station, electric appliance and other main parts.Machine operating mode USES the manual hydraulic valve, the working principle of the cavity ensure pipe diameter would be able to take shape, with multiple diameter of steel ball to push system, to ensure that in the process of pushing into shape tube buckling image, a steel ball synchronous driving system, make the elbow after molding shape ovality range + / - 0.2 or so, after molding cavity mould, artificial remove the elbow, such a process completes a bend of the blank is made, then special groove machine put elbow to elbow to elbow on both ends of the department of the flat.

Stainless steel elbow cold push molding machine, mechanical design and production of elbow high efficiency, more than 2 times the speed of traditional equipment, according to different pipe wall thickness demoulding speed can be adjusted.

Medium frequency heating seamless elbow machine with diameter of 21-1620mm, wall thickness of 3-120mm, length of steel tube of material of 3-24m, medium frequency heating push-making machine mold (core head), heating coil, separately ordered by the user.Intermediate frequency heating pusher is made by user alone.Intermediate frequency heating push system has low price, guaranteed quality and high production efficiency.

Select the main push pump according to the selected speed of the elbow to be pushed, the sluice mandrel to be heated to the working temperature to start pushing. During the work, the pushing speed can be adjusted and pushed to the middle point. The pushing machine automatically stops the feeding of the hydraulic gate.Note: The main pump can be used at the same time when working, in general, only one can be used.It can also be used to step back without stopping.The back pump cannot be used at the same time, only one can be started, and the other can be used as a backup.Feeding pump can only be used when feeding., the safety pressure of the hydraulic system of the main oil pump shall be set as, and the safety pressure of the hydraulic system of the auxiliary oil cylinder shall be set as.The actual stroke should be less than the maximum stroke, that is, there is some margin between the front and rear ends of the active push plate and the actual end ends, so as to avoid the cylinder piston running to.

Cangzhou Aocheng Machinery Equipment Co., LTD not only produces elbow machine, but also produces 5D pipe bending machine, tee machine, pipe expanding machine, press machine, bevel machine and other mechanical equipment as well as supporting molds.