The company is a major production of various types of pipe bender manufacturers.The type of pipe bender is provided by the user.Pipe bender is called: medium frequency pipe bender, hydraulic pipe bender, chain pipe bender, etc.

Customers in the choice of pipe bender at the same time to understand the quality of the pipe bender and the function of the pipe bender.This is every customer in the choice of pipe bender at the same time, must understand.When purchasing the pipe bender, it is first explained that the pipe bender is the chain type pipe bender or the medium frequency pipe bender. The travel and operation of the above two kinds of pipe bender are different.Medium frequency pipe bender is divided into manual operation, semi-automatic operation and fully automatic operation pipe bender.That's the first one.When the customer explains the mode of operation in selecting the bender stroke and the quality of the bender.The quality of the pipe bender is controlled by the system first, and the machine is stable.With automatic Settings, it is important to mass produce.

Now there are many changes in the pipe bender, that is, the power is larger, the Angle of the pipe bender can be controlled, and the speed is faster in the process of operation.Pipe bender can reduce the cost of engineering production.

Pipe bender in the production process simple operation, high production efficiency, low noise, etc.

The pipe bender is exported to all over the world, and the pipe bender is exported to all over the world.

Every purchase of our company's pipe bender, we will make a low price, good quality pipe fitting equipment for each user.This is the quality assurance of our company in the market for many years.Welcome you to visit the factory and call consultation.

630 pipe bender

Before apply for pipe bender, needs to check the power cord, motor, switch, oil pump, hydraulic tubing and clamping fixture and so on is perfect, check if the parts of the screw loose surface, the metal case and have the appearance of the leakage between the power cord, if found that question, then demand for timely repair, replacement ratio and can only be used in the future.

When the pipe bender is used, it needs to be put smoothly. When it is started, it needs to be carried out when the unloading valve is turned over. After comparison and start, it needs to be rotated in advance for 2-3 minutes, and then it can be used only after comparison and normal motor operation.On the normal operation of pipe bender pump temperature control at 20 and 55 degrees Celsius, if temperature is too high it should be in first for cooling, in the process of low temperature using is very easy to attack the problem, so is the ability to pass of the heat pump itself attack idle, will gradually to booster, the progress of the oil temperature in this way,If the temperature is too low, it can not be used.

In operating pipe bender directional control valve, the general operating force is can't do more than 10 kg, and demand that the accuracy of the operation, about reversing valve and high pressure hose connection method is free, so the process of using reversing valve needs to be familiar with some directional azimuth, in reversing the demand in turn unloading valve first.

The use of the high-pressure hose of the pipe bender needs to avoid discounts and sharp bends, so the operator can not rely on the hose too close to avoid the occurrence of unexpected appearance. If the occurrence of leakage, then the appearance of the protrusion or explosion is presented, which is to stop the use of.

During the operation of the pipe bender, the bent pipe needs to be put smoothly. The hydraulic push rod in the extended direction and the horizontal orientation of the two ends of the pipe is in the range of the plate radius of 3 meters, which needs to avoid personnel and equipment.