| Brief introduction and technical parameters of elbow pushing machine
Elbow push system machine mainly seamless tube, welded steel pipe or spiral pipe as raw material, using medium frequency heating, the power and frequency of the elbow push system machine, adjustable elbow push system machine can ensure proper heating depth, ensure that the product material stable performance, the medium frequency power supply power factor above 0.95, save energy equipment is novel, compact structure, simple operation, high production efficiency.Adopt the hydraulic cylinder to push the raw material, the thrust is strong, the elbow pushing machine is mainly controlled by automation, which can greatly save manpower.It has the advantages of low construction investment, high yield of finished materials, and strong performance of transporting material specifications.Our company has designed and manufactured various types of elbow pushing machine, elbow pushing machine products are mainly used in petroleum, construction, water conservancy, heating and other fields widely used.We can directly customize the elbow push machine according to the requirements.The company will be responsible for the installation and debugging of all the customized pipe fittings.
Check the elbow push machine before working
Elbow push machine before work need to check the electrical switch, travel limit switch is safe and reliable, flexible operation, safety protection device is safe and reliable.Check whether the hydraulic oil on the side of the elbow pushing machine has reached the red line limit.Check whether the pressure regulating valve on the oil pressure return road of the elbow pushing machine is in a state of no load. The block of the elbow pushing machine must touch the rear limit.Confirm whether the work instruction written on the elbow pushing machine is consistent with the work content.After checking the mould of the elbow push machine and all the above requirements, our operator can start to work.The above briefly introduces the main parts of the elbow push machine that need to be checked before working.
What matters should be paid attention to when elbow push machine is operated
Operators work closely with the feed restrictor in the operation of the elbow push machine to ensure that all partners are announcing the bending signal.It is necessary to compaction the sheet material when bending, and the elbow pushing machine to prevent the sheet material from warping and wounding when bending, and it is necessary to cut off the power when adjusting the sheet material pressing die, and the elbow pushing machine is suitable for stopping the operation.When changing the opening of the lower die, no material is allowed to contact with the lower die. When the machine tool is operating, the back of the machine tool is not allowed to stand.Prevent pressing and folding sheet material at one end alone.If the workpiece or mold is found to be incorrect during operation, stop to proofread. The large bend elbow push mechanism should be proofread by hand to prevent hand injury.To avoid damage to the machine tool, it is necessary to prevent the folding of super-thick iron plate or hardened steel plate, alloy steel, square steel and the sheet metal which exceeds the performance of the sheet bending machine and the cylinder elbow pushing machine.The staff should check the coincidence degree of the upper and lower molds, and whether the instructions of the pressure gauge conform to the regulations.Abnormal immediately shut down, check the original and timely cleaning.
Before the elbow pushing machine, wooden blocks should be placed under the lower die of the oil cylinder on both sides to lower the upper slide onto the wooden blocks.Exit the control system program first, then plug the load power supply.
Aocheng machinery is a professional production of pipe fittings equipment company.Since its establishment, we adhere to the principle of honesty, steady management, get the trust of domestic customers, to the company to establish a good corporate image.
The 1804-1806-1807
|
