| The main part and composition of the three-way machine
The three-way machine is mainly composed of oil pump, motor, PLC control box, water tank and corresponding model molds.
The body of the three-way machine is a non-standard product, so there is no detailed specification and model. We can customize the three-way machine according to the customer's request.
The diameter of the tee is 21mm-630mm and the wall thickness is 3mm-20mm.
The function of mechanical tee and ordinary tee is different.Mechanical tee is divided into groove mechanical tee and screw mechanical tee.It can be used to connect branch pipe directly on the steel pipe, and has more applications in the device of fire fighting pipe and spray pipe.The mechanical tee can be used when diverting or confluence is required.
The device method first uses a hole opener on the steel pipe, and then the mechanical tee is stuck into the hole, and the hole is sealed by a sealing ring along the pipe wall.Mechanical three - wire connection and groove type two.When the mechanical tee is connected, the clearance between the mechanical tee and the hole should be checked, and all parts should be average, and then fastened in place;Mechanical tee hole spacing should not be less than 1m.
Our main production machinery and equipment manufacturers, long-term supply of elbow machine, pipe bender, tee machine, pipe expanding machine, press, beveling machine, push machine, diameter expanding machine, mandrel, shaping tire, tee mold, size of the first tire, pipe expanding mold, high and medium frequency power supply and so on.Among them, our mechanical equipment and molds have been exported to Malaysia, India, Egypt, Argentina, Mexico, Iran and other overseas countries, and have been highly praised and affirmed by foreign customers.Our bending machine, expanding machine, beveling machine, tee machine, bending machine mould and other equipment by virtue of its good quality has also been recognized at home and abroad.
The three-way machine itself is a non-standard product, so there is no specific specification and model, we can directly customize according to customer requirements
We can do both the diameter of the tee from 21mm to 630mm and the wall thickness from 3mm to 20mm
Hydraulic three - way machine production of the shape and model
Our factory equipment can produce carbon steel, alloy steel, stainless steel, also can produce various types of three-way, welcome new and old customers to negotiate business.
Hydraulic three-way machine itself belongs to non-standard products, so there is no specific specifications and models, we can directly customize according to customer requirements
We can do both the diameter of the tee from 21mm to 630mm and the wall thickness from 3mm to 20mm
Tee pipe forming machine is used for carbon steel, stainless steel pipe tee machine, the machine adopts liquid drawing bulging forming principle, the equipment can realize both inching and semi-automatic operation mode, adopts hydraulic synchronization method of left right side urn, stroke by stroke switch is adjusted, and the main cylinder pressure relief characteristics, safe and reliable, high production efficiency.
2101-2103.
|
