| What is the equipment of the elbow machine
First of all, elbow machine belongs to non-standard products.There is no limited specification size and model, can be customized according to customer needs.
Elbow machine is a special equipment for the production of elbow.The elbow produced by the elbow machine is mainly used for pipe bending a pipe fitting.In the pipeline system with more than 80% of the proportion of all pipe fittings, is a very important pipe fittings, elbow machine is the production of elbow mechanical equipment, through high temperature system or chain elbow machine, medium frequency induction heating elbow machine (the main power for the hydraulic cylinder).Customers choose according to their own needs.If you need to produce stainless steel elbow, choose cold push elbow machine.Need carbon steel and alloy steel elbow, choose medium frequency heating elbow machine.Cold push elbow machine than the price of the middle frequency heating elbow machine is relatively cheaper.The above situation is according to the needs of customers to customize the elbow machine equipment.
The elbow pushing machine should be carefully done before operation: the machine tool must be well grounded, and the wire should not be less than 4mm2 copper flexible wire.Do not allow access to the power supply voltage beyond the specified range, do not plug and unplug the plug-in live, do not use the test control loop, otherwise it may damage the device.Do not pull out the wire or cable when inserting and unplugging the plug, in case of pulling off by welding.Proximity switches, encoders, etc. should not be hit with hard objects.Cannot hit the display unit with sharp objects.Electrical box must be placed in the ventilated place, do not work in dust and corrosive gas.It is not allowed to add or change the PC input and output terminal without permission.The motor steering must be reconfirmed when replacing the machine tool power.The machine should be kept clean, especially pay attention to the clamping block, slide block and other sliding groove should not have foreign matter.Add lubricating oil to the chain and other sliding parts regularly.Power must be disconnected during cleaning and maintenance.Preparation before starting: check whether the oil level in the oil tank reaches the oil level line, refuel at each lubrication point, confirm the motor steering when starting up, check whether the oil pump has abnormal sound, and check whether the hydraulic system has oil leakage after starting up (the Angle encoder is not allowed to refuel);Pressure adjustment of elbow pushing machine: use solenoid relief valve to adjust the pressure to ensure that the system pressure reaches the required working pressure, which is generally no higher than 12.5Mpa.13. Mold adjustment: Mold installation requires that the mold is centered with the clamping block, and the clamping block can be adjusted by bolts;The booster block is centered with the mold, and the booster block is adjustable.Center the core head with the mold, loosen the core head holder bolt, adjust the center and tighten the bolt.
2512-2513.
|
