• - Cold Forming Elbow Machine
• - Hot Forming Elbow Machine

• - Pipe End Expanding Machine
• - Full Length Pipe Expander

• - Single-Head Pipe Fittings Beveling Machine
• - Automatic Double-Head Elbow Beveling Machine
• - Automatic Triple-Head Tee Beveling Machine
• - Large Steel Pipes Beveling Machine

Cangzhou Aocheng mechanical equipment production three - way machine, especially a cold extrusion three - way machine.The tee produced by cold extrusion tee machine is pipe fitting, which is used for pipe connection.Cold extrusion tee machine production tee is also called tee pipe fittings, stainless steel tee pipe fittings, etc., used in the main pipe to branch pipe, cold extrusion tee machine in the production of tee processing process usually uses cold extrusion means to extrude the blank parts.But now the cold extrusion tee machine includes a working table, the mounting frame and the two sides are fixed with the cylinder, the working table is fixed with a template, the upper end of the template is provided with a mold cavity, the mold cavity has a blank, the upper end of the blank is clamped with a fixed plate.Cold extrusion tee machine table installed PLC controller and control panel, cold extrusion tee machine control panel has a liquid crystal display, so cold extrusion tee machine in the process of operation can accurately extrude the size of the customer needs.

Three - way machine equipment for three - way production special equipment.The structure of the three-way machine: the optimization design of the whole frame fuselage of the three-way machine ensures the strength, the welding parts are inspected for non-destructive flaw detection, and the aging treatment is made after welding to ensure the complete elimination of stress and no deformation occurs in the use of the equipment.There are T-shaped grooves under the slide plate and above the worktable for the installation of molds.The three-way machine is equipped with the dead-point locking device on the slide block to prevent the slide block from slipping.The power mechanism of the three-way machine is arranged on the top of the machine, and the safety platform and fence are arranged on the top of the fuselage.The slider guide rail of the three-way machine is lubricated by non-recovery type automatic circulating thin oil, and equipped with oil receiving box and fault display device.

3303-33010.