A bend machine is a mechanical device used to process metal pipes or pipes that can bend straight pipes into the desired Angle and curved shape. It is widely used in petroleum, chemical, aerospace, shipbuilding, construction and other industries.
The following will introduce the elbow machine workflow in detail, mainly including the following steps:
1. Material preparation: First of all, prepare the metal pipe or pipe to be processed, and select the appropriate material, diameter and length according to the design requirements. Measure and cut the pipe or pipe to the desired length.
2. Elbow machine Settings: According to the processing requirements, the elbow machine will be necessary Settings and adjustments. According to the diameter and wall thickness of the pipe or pipe, select the appropriate elbow die (bending die) and fixture, and install and adjust. Adjust the parameters of the elbow machine, such as bending Angle, bending radius, processing speed, etc.
3. Processing preparation: Put the prepared pipe or pipe into the fixture of the elbow machine to ensure that its position and fixing are stable. As needed, the curved path of the pipe or pipe is marked with a mark or wire for the operator to bend.
Bending operation: start the elbow machine and make it work according to the preset parameters. The elbow machine will apply force to the pipe or pipe, causing it to bend. The operator must monitor the machining process to ensure that the bending Angle and shape are in accordance with the requirements. Depending on the need, it may be necessary to perform several bending operations to obtain the desired curve shape.
5. Inspection and adjustment: After completing the bending, take out the processed pipe or pipe for quality inspection. Check the bending area for cracks, deformation, or other defects. If necessary, parts that do not meet the requirements can be repaired or redone.
6. Follow-up Procedure: Perform follow-up operations as required. For example, the bending parts are polished, polished or sprayed to improve the appearance quality. At the same time, the pipe or pipe can also be cleaned and anti-corrosion treatment to extend its service life.
7. Record and archive: timely record the relevant data in the entire processing process, such as bending Angle, bending radius, processing speed, pipe or pipe material specifications. Archive this data for future reference and traceability.
The workflow of the elbow machine is very important, which directly affects the processing quality and production efficiency. In actual operation, the operator needs to adjust and optimize according to the specific situation to obtain the best processing effect. At the same time, in order to ensure the stability of the operation, the operator should also strictly abide by the relevant operating procedures and stability measures.
For more knowledge about elbow machine, please pay attention to our website: http://www.fitting-equipment.com
| 