• - Cold Forming Elbow Machine
• - Hot Forming Elbow Machine

• - Pipe End Expanding Machine
• - Full Length Pipe Expander

• - Single-Head Pipe Fittings Beveling Machine
• - Automatic Double-Head Elbow Beveling Machine
• - Automatic Triple-Head Tee Beveling Machine
• - Large Steel Pipes Beveling Machine

Pipe bending machine equipment structure: the guide frame, main cylinder and the plate, pushing plate, pipe clamp device, bend the rocker, rocker arm, bend an axle shaft, bend combination clamp plate, medium frequency transformer adjusting device, frequency transformer, intermediate frequency power supply, intelligent control system, work station (touch screen), cooling water circulation system, etc.Technical parameters of pipe bender: the bending raw materials used by pipe bender are seamless pipe, straight seam welded pipe, etc.The bending radius of the elbow must be greater than 2.5D (the following 2.5D elbow push-making machine manufacturing process), intelligent control of the elbow Angle, (the Angle of the elbow should be set arbitrarily within a certain range according to the need).The diameter, wall thickness and stroke of the main cylinder can be customized according to the maximum diameter and bending radius of the elbow.When the intermediate frequency pipe bender breaks down, it should be repaired in time: the wear level of the important parts of the pipe bender in transmission is limited, and there are also yaw, very noise, shock and shaking signs.Pipe bender in the steering wear gap is too large, control obstruction, transmission gear and shaft wear damage is serious, difficult or often jump shift, brake mechanism severe wear, brake performance degradation or failure, can not be mediated.The bending frame body is deformed or cracked, the working equipment is worn seriously, the operation is hindered, the normal things can not be completed, the accuracy of the things can not meet the requirements, the moving gear is worn seriously, the pipe bender can not be operated and run normally.

3215-3305.