• - Cold Forming Elbow Machine
• - Hot Forming Elbow Machine

• - Pipe End Expanding Machine
• - Full Length Pipe Expander

• - Single-Head Pipe Fittings Beveling Machine
• - Automatic Double-Head Elbow Beveling Machine
• - Automatic Triple-Head Tee Beveling Machine
• - Large Steel Pipes Beveling Machine

Pipe bender adopts touch screen plus NUMERICAL control module, dialogue operation, easy program setting.

The bed structure of pipe bender is stable and not easy to deform. ,

The bending machine can set 16 bending angles for each gear and store 16 groups of files in memory.

The bending machine has the function of slow positioning, stable bending Angle, and the repetition accuracy can reach ±0.1°

The error information of the pipe bender is displayed on the screen to help the operator eliminate it immediately.

Pipe bending machine is a form of pipe bending and top function of the bending equipment, medium frequency pipe bending machine reasonable structure, safe use, simple operation, reasonable price, convenient loading and unloading, multi-purpose and many other advantages, has a large market share in China. If the pipe bending machine before operation, check whether the equipment is normal, in the mold bending pipe should be selected according to the processing pipe diameter, and should be placed in order. When the intermediate frequency pipe bender is working, non-operating and assisting personnel are not allowed to walk around the equipment and stay to watch. The equipment should be turned off after operation, lock the electrical box, and do good maintenance before and after operation.

The disassembly process of hydraulic cylinder of pipe bender: First of all, you should know the hydraulic cylinder you need to disassemble, and map it before disassembly. Prepare for later assembly. Watch the oil opening position and placement size. The next step is to remove the cylinder bottom, cylinder head and guide sleeve. Remove the piston rod from the cylinder, in order to prevent the piston rod impact injury, remove the piston. The piston is usually thread contiguous, but there will be a stop thread, to remove the stop screw, in order to remove the seal ring. When a hydraulic system has multiple hydraulic cylinders, it is necessary to connect what kind of valve at the pump outlet. It is better to install a solenoid valve, which can control the pressure of your whole system. When the pressure of the cylinder rises above the nominal pressure, it can open the pressure relief. Under the nominal pressure, the valve can be closed and the hydraulic cylinder can be used normally.