| Three - way machine manufacturer to ensure the stability of equipment
Tee machine is also called pipe fitting equipment: Pipe equipment used water with independent power structure and electrical system, PLC programmable controller, which can realize point, manual, semiautomatic and fully automatic four kinds of operation mode, instead of traditional lead extruding, no environmental pollution, the whole machine reasonable structure, strong rigidity, the main oil cylinder clamping force is big, pipe extrusion can effectively guarantee the stability of the pipe forming. Aocheng machinery and equipment high production efficiency, simple operation. Optimize the extrusion molding, to ensure the stability of the production of products molding. Pipe fitting equipment can extrude Y -, T -, L - shaped products.
The three-way solenoid valve of the three-way machine is divided into normally closed and normally open two kinds, normally closed refers to the coil is not energized when the gas road is broken, normally open refers to the coil is not energized when the gas road is through. Normally closed two three-way solenoid valve operation principle: to the coil electricity, gas circuit connected, once the coil power off, gas circuit will be disconnected, which is equivalent to the point. Two five-way double electric solenoid valve operation principle: to energize the positive action coil, the positive action gas circuit is connected, even if the positive action coil power off the positive action gas circuit is still connected, will always be kept to the resistance to make the coil energized stop. The resistance to make the coil is energized, the resistance to make the gas circuit connected (resistance to make the gas hole), even if the resistance to make the coil power resistance is still connected, will always be maintained until the positive action coil energized stop. This is equivalent to self-locking. Two three-way solenoid valves are usually one in two out series. There is also A normally open normally closed, the solenoid valve three mouth respectively for ABC three mouth, usually A to B or A to C mouth, there are B to C mouth. Normally closed type is the solenoid valve power off in the future, the valve is closed, normally closed. That is, it cannot flow out of port A.
Tee machine Almost all metal materials can be processed into tee, of course, including titanium alloy. But in general, titanium alloy tee forming is difficult, need to do 3-5 times to shape, after our continuous improvement, finally got a molding method.
Please consult our technician for details.
|
