• - Cold Forming Elbow Machine
• - Hot Forming Elbow Machine

• - Pipe End Expanding Machine
• - Full Length Pipe Expander

• - Single-Head Pipe Fittings Beveling Machine
• - Automatic Double-Head Elbow Beveling Machine
• - Automatic Triple-Head Tee Beveling Machine
• - Large Steel Pipes Beveling Machine

The elbow machine mainly includes the frame, work table, side work table, hydraulic press, oil tank, electrical box and control board, and forming mold.

The clutch, spring and belt of the elbow machine are checking the smoothness of the machine tool. Check circuit damage, aging, motor, electromagnet is normal, check the wear of shaft guide precision machine. Check the slide, seal block, seal ring, check part of the electrical control, check and adjust the bolt of the propulsion to the workbench. According to the different types and processing requirements of elbow propulsion machine, develop targeted and effective stable operation procedures, and carry out the necessary job training operation process.

Bend machine wear skateboard and positioning shaft at the origin, the work back to the origin program, elbow push the machine run 1 to 2 minutes, full slide stroke movement 2-3 times, such as abnormal sound or failure shall be immediately stop, eliminate malfunction, all work, push the machine is working by unified command, the operation staff work closely with feed. This is also the process of driving the machine in the production process and the speed of producing the product.

Elbow machine mainly produces carbon steel, alloy steel, stainless steel and other pipe fittings. Elbow machine itself is a non-standard product, so there is no specific specifications and models. We can directly customize various types of push-making machines according to customer requirements.

Elbow machine is divided into two kinds, one is medium frequency heating pushing machine, the other is cold pushing machine, cold pushing machine push elbow diameter 21mm-630mm, wall thickness is 3mm-30mm, medium frequency heating pushing machine push elbow diameter 21mm-1620mm, wall thickness is 3mm-100mm above two kinds of pushing machine can push the diameter and wall thickness, We can do all the above models. Cold push elbow machine is mainly cheap. Although the intermediate frequency heating elbow machine is not as cheap as the cold push machine, but the production efficiency is high and the operation is simple. Intermediate frequency pushing machine adopts PLC control system.

The company's production of elbow can meet the use of elbow pipe fittings customers, you are welcome to the company's elbow machine consultation and order!