| Proper operation of elbow and pipe bender
Elbow machine introduction IF pipe bending machine can be divided into CNC pipe bending machine, hydraulic pipe bending machine and so on. Mainly used in electric power construction, railway equipment, steam boiler, bridge, ship, furniture, decoration and other aspects of pipeline laying and repair, with the advantages of more obedience, reasonable structure, general operation, etc. The pipe bending machine and elbow machine produced by our company can make pipe fittings, which is recognized by every user who produces pipe fittings. The elbow machine can also use the cylinder as a hydraulic jack. Compared with the CNC elbow setting and equipment deployment, it has the characteristics of self-made cost and convenient operation, and has obtained satisfactory recognition in foreign countries. For example, the customers recommended by our company and the long-term cooperation with our company.
1. Before operation, mainly check whether the smooth points of the bender are short of oil, whether the active structure is loose, whether the protective device is reliable, and can be operated after approval. 2. Start the oil pump of the bender, and the system pressure is not connected in the regular category. If it is high, the hydraulic components and the power supply are too low, which will affect the operation. 3. Adjust the required orientation and viewpoint of the parts. 4. Adjust the positioning of the parts to the required length. 5, adjust the vertical guide rail, so that the guide mold pressing cylinder can clamp iron pipe. 6. The clamping cylinder can clamp the iron pipe. 7, normal manipulation of the workpiece into the tortuous die, and the front end of the touch positioning, step down the foot switch, can be finished.
Pipe fitting equipment manufacturers mainly produce elbow machine, pipe bender, pipe expanding machine, press, beveling machine, straightening machine, straight seam pipe production line.
|
