| Elbow machine structure function introduction
The elbow machine needs to be tested before use as follows: first, the clamping die of the elbow machine is fixed to the mandrel, and the clamping die of the elbow machine is placed into the clamping die to fix the mandrel. Adjusting the mo base of the positive screw is the mo seal in the wheel die. When installing the back clamp button, Jiamo backward, clockwise rotate the clamp mold to adjust the screw balance 1/2-1/4 turns. Nuts to hold the fixture base.
Elbow machine is one of the pipe fittings for making elbow. It is mainly designed to solve the problem of large wall thickness difference of the existing bending head. Elbow machine mainly includes a frame, intermediate frequency heater, hydraulic system, fixing table is fixed at the back of the frame, fixing table center hole, cylinder is fixed on the fixing table, cylinder through the pipeline and hydraulic system connection, push head and each cylinder rod connection, push head center hole, intermediate frequency heater and heating ring is connected by wire, The rear core rod passes through the hole in the center of the heating ring and the push head and the hole in the center of the fixing table. The active semicircle card plate is composed of two upper and lower semicircle cards. The upper and lower semicircle card plate of the active semicircle card plate is installed on the front surface of the push head, and is set on the core rod at the same time, and the core rod has a gap.
Elbow pipe fittings are divided into seamless elbow and straight seam elbow. Elbow machine in the production process is processed in this way. By using a bend machine commonly used in elbow bending, a heating coil is used for heating. The blank covered on the die is moved forward under the push of the bend machine and heated in motion to enlarge the diameter and the Angle required for bending. This is the current elbow machine production elbow pipe simple production process. This production process can help customers bring effective benefits.
Elbow machine is the main equipment for the type of elbow pipe that customers order and the material that needs to be produced. Elbow machine can push the elbow butler products ordered by customers at one time, the main operation is simple, high production efficiency, low cost.
Function of elbow machine: The main function is to produce complete models of elbow pipe, can be mass production and processing of elbow pipe, elbow function to meet the quality requirements of elbow pipe. For the development efficiency in recent years, elbow machine to the production of elbow pipe products for the customer has brought effective benefits!
|
