| A push machine is a commonly used mechanical device that is usually used to process and correct workpieces. In the machining process of the push machine, the oil cylinder is a very important part, which is used to drive the tool head to move. Therefore, the correct wearing of the cylinder of the push machine has a crucial role in the normal operation and processing effect of the push machine.
Here we will introduce in detail how to correctly wear the cylinder of the push machine.
1. Prepare
Before you begin the operation, you must first make preparations. This includes checking and cleaning the machine to make sure all parts on the machine are in good condition. Then, remove the cylinder and related parts and check if they are intact. If any damage or wear is found, it should be replaced promptly.
2. Install the oil cylinder
Before installing the cylinder, the workbench of the machine needs to be moved to a lower point. The cylinder is then inserted into the slot on the base of the machine and locked. Next, connect the tubing to the cylinder and connect it to the machine's pressure system. During the connection process, be careful to avoid oil or gas leakage.
3. Adjust the position of the cylinder
After installing the cylinder, adjust its position. This relates to the height and horizontal position of the cylinder. When adjusting the height, it is necessary to ensure that the distance between the cylinder and the workbench is appropriate. When adjusting the horizontal position, it is necessary to use a level and other tools to ensure the smooth position of the cylinder.
4. Test the cylinder
After the cylinder is installed and adjusted, it needs to be tested to ensure its proper operation. When testing, no-load testing should be carried out first to ensure that the piston of the cylinder can move smoothly without load. Then, a load test is carried out to simulate the situation during actual machining. If any problem is found during the test, it should be adjusted or repaired in time.
Sum up
The correct wearing of the cylinder of the push machine is the key step for the normal operation and effective machining of the push machine. Through the above steps and precautions, we can ensure that the cylinder is properly installed and adjusted, and verify its normal operation during the test process. This will help improve the efficiency of the push machine and ensure stable production.
For more information about the push machine, please pay attention to our website: http://www.fitting-equipment.com
| 