The process of making pipe bending by pipe bending machineelbow machine,tee machine,elbow bevelling machine supplier

The process of making pipe bending by pipe bending machine
The chuck is mounted on the rotating arm, and the position of the center line of the chuck is adjusted to the required bending radius to be fixed;Then, the position of supporting roller is adjusted so that the distance from the center line of the bent pipe to the center of rotating arm axis is equal to the bending radius.Insert the steel pipe into the heating ring and clamp it into the chuck;Adjust the heating coil so that its inner surface is consistent with the outer surface of the steel pipe.Open a medium frequency heated crew, when the pipe is heated to 950 ~ 1000 ℃ (in orange), immediately start the motor to bend;Open the cooling water valve at the same time, spray water on local cooling.

Cangzhou Aocheng Machinery Equipment co., LTD.
Address : Bobei Industrial Zone, Mengcun Hui Autonomous County, Cangzhou City, Hebei Province, China
Mobile : +86-15230713671
Fax : +86-317-6218625
E-mail : 15230713671@163.com
Skype : zhiguang.wu

About Us　|　 Products　|　 Order Online　|　 Contact Us