Elbow machines are divided into two kinds briefly described below
The elbow machine is divided into medium frequency elbow machine and cold push elbow machine. The medium frequency elbow machine is mainly made of carbon steel, alloy steel, etc.Elbow machine mainly produces various kinds of different curvature radius of 1-2.5D after various diameters of counterfeit pipe fittings.With the company with the elbow machine technology and development, elbow machine has been advanced technical improvement.The elbow machine is beautiful in design, stable in performance and long in use.
Elbow machine can produce a variety of materials are mainly divided into cold push elbow machine and medium frequency elbow machine.The elbow machine produced by our company adopts advanced technology, and the service life of the elbow machine can surpass the production of similar products. Our company has experienced countless technical transformations according to the production process of users.While improving the quality of elbow, ensure the service in place, put the interests of customers in an important position.We use advanced technical force to create excellent products, the following introduction of elbow machine in the production process operators wear the corresponding protective clothing.Before using the elbow machine, it is necessary to check whether the various parts and parts of the elbow machine are firm.All parts of the elbow machine should be kept clean in the process of use.Elbow machine can not place any items on the machine before use, so as not to damage the machine during operation.All the elbow machine ordered in the company, our company will put the elbow machine use process sorted out and sent to each customer.
The raw material of the elbow machine is seamless steel pipe, welded steel pipe and coiled steel pipe.The equipment can produce elbow product specifications range is: outside diameter: Φ21mm ~ Φ1620mm;Wall thickness: 5mm ~ 120mm Angle: we can according to customer requirements to debug and customized.The composition of the hydraulic push machine: the frame, the main cylinder support plate (including the main cylinder), the movable push plate, the front support plate, the semi-automatic feeding structure, the intermediate frequency coil adjustment frame (including the intermediate frequency heating coil), the intermediate frequency power supply, the electrical control system and so on.Hydraulic elbow pushing machine is the traditional product of our company, which is mainly used to produce all kinds of 1D-2.5D elbow.With the technical development of the elbow forming machine in our factory, the elbow machine has been improved.At present, the production of elbow machine in our factory has integrated ultra-short stress line, cone die diameter expansion technology;Digital control medium frequency induction heating technology;No back pressure, low energy consumption of hydraulic transmission technology in one.
Realized the hydraulic opening and closing of the push plate gate, the hydraulic clamping of the raw material steel pipe and other operational mechanization innovation, and combined with the factory's two-step push pipe machine innovation and expansion of the elbow machine, the development of four cylinder push machine and other new products.
Pipe fittings equipment manufacturing co., LTD. Long-term supply of various types of elbow machine, elbow beveling machine, pipe bending machine, three-way machine, pipe expanding machine, press and other pipe fittings equipment, pipe fittings equipment products, good quality, model all, welcome new and old customers to negotiate order!
This elbow machine is a common equipment for the production of elbow pipe fittings. It can produce alloy steel elbows with the wall thickness of 21-1620mm and the thickness of 3-120mm and the multiple of more than 1D.
Elbow machine installation process: pull out the elbow machine clamping die fixed and relaxed, in the control panel in manual mode, press the clamping die way end, at this time there should be a gap between the wheel mold, can adjust the screw to adjust the steamed bun.Adjust the jia mo seat adjustment screw to adjust, adjust the jia mo adjustment screw so that the mold and the wheel mold completely close.Press the back button to make the clamping die back, and then rotate the clamping die adjusting screw clockwise about 1/2-1/4 turns.Then the clamping die seat fixed nut lock.The above briefly introduces the elbow machine in pipe fitting equipment.
Our company adhere to the manufacturing of customer satisfaction pipe fittings equipment, fulfill the commitment, continuous improvement, the pursuit of comprehensive development, the quality policy and loyal marketing, create brilliant marketing concept, improve the marketing network, with many years of manufacturing experience to occupy the market, with sincere service to customers.
108-110.
|
