| Intermediate frequency elbow machine before the use of the preparatory work
The company's production of medium frequency elbow machine design exquisite, simple operation, high production efficiency, is a manufacturer with many years of production experience. In the company order medium frequency bending machine equipment, our company will manufacture a customer satisfaction within 60 days, quality assurance of pipe fitting equipment.
Intermediate frequency elbow machine in the operation before the need to prepare is to ensure the stability of the intermediate frequency elbow machine, but also to ensure the normal use of the intermediate frequency elbow machine, but also to extend the service life of the intermediate frequency elbow machine, and the quality of the intermediate frequency elbow machine produced elbow pipe fittings.
Medium frequency elbow machine before use need to pay attention to:
Medium frequency elbow machine grounding wire, the use of grounding wire must be not less than 4mm flexible wire. If the voltage on the medium frequency elbow machine exceeds the specified range, the plug must be confirmed when the power is off, and the control loop can not be used when testing.
When the intermediate frequency elbow machine is inserted and dialed, it is not possible to pull the wire or cable, which can effectively avoid the plug-in being pulled off. Do not use heavy objects to impact the encoder. The electrical box of the medium frequency elbow machine should be stored indoors in a ventilated place and cannot be operated in corrosive gas and dust.
Check the intermediate frequency elbow machine carefully before using the intermediate frequency elbow machine, the intermediate frequency elbow machine can not be installed privately or change the input system. When the power supply of the intermediate frequency elbow machine is adjusted, it must be re-confirmed to ensure that the intermediate frequency elbow machine is regularly maintained in production. This ensures that the intermediate frequency elbow machine is clean and that there is no foreign body in the sliding groove before use.
The intermediate frequency elbow machine needs to check the line position of the oil level before opening, lubricate at the elder brother lubrication point, check the oil pump after starting there is no abnormal sound, adjust the pressure of the intermediate frequency elbow machine when using electromagnetic relief valve, can ensure that the pressure of the system to meet the working specifications of the pressure value, usually not higher than 12.5mpa.
The company mainly produces intermediate frequency elbow machine, tee machine, press, pipe expanding machine, beveling machine, straight seam welding pipe production line, pipe bending machine and other pipe fitting equipment.
| 